Try ordering new shims. I was warned by a professional restorer that two
years ago he ordered some and the bolt holes were in the wrong place. So I
ordered some. Guess what? Two years later the holes are still in the wrong
place. I returned those and ordered another set from another source and some
of
those had the holes in the wrong place. I return the some and they replaced
them and some of the replacements had the holes in the wrong place. Now I
have a selection of shims that are sufficient to get the correct "0" end float
on the worm!
I installed a new worm and the shims were very different from the original
that came out.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|