I found Rhode Island Wiring Service Inc. carried a fairly wide range of sleeve
material. I ordered some of the plastic pvc and fabric conduit for my TR6. It
looks factory and allowed me to clean up some of the wiring when I installed an
additional relay (for the running lights - the dash switch was failing due to
the current load). URL is http://www.riwire.com/ Click on Supplies and then
click on Metal and Non-Metal Conduit Tubes
Hope this helps.
Robert Kohout
robertko@charter.net
72 and 74 TR6
---- "Foster wrote:
> Throughout the TR6 there are various times where black PVC like sleeve
> material is used to buffer the wiring. We see it for the wires coming through
> the inner wing for the headlamps and we see it covering the metal tabs all
> over the engine bay that secure the loom. Do we have a source for that black
> PVC sleeve or any suggestions for a viable alternative ?
>
> Stan
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You are subscribed as robertko@charter.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|