Bob,
If you are handy and creative, you can go to an upholstery shop and get some
remnants and make your own.
You have to get a curved upholstery needle and some strong nylon thread. If
you practice a bit before getting started, you will find that making a nice
stitch pattern is rather easy.
The end effect is much better than what you typically find using an off the
shelf kit.
Joe C.
-----Original Message-----
From: triumphs-bounces+spitlist=cox.net@autox.team.net
[mailto:triumphs-bounces+spitlist=cox.net@autox.team.net] On Behalf Of Bob
Labuz
Sent: Sunday, December 30, 2007 10:36 AM
To: Triumph Email List
Subject: [TR] leather steering wheel cover
Hello,
I am looking to replace the very old cover on my TR3A and also get a new
cover
for the TR4.
Does anyone know of a supplier of these items?
Moss sells one which fits 16.5 wheels but if I measured correctly the 4 is
16
and the 3 is 17.
The existing cover on the 3 I believe is an original AMCO part very old and
ready for the trash.
I would like to go with a similar style, black and laced from the inside.
Thanks,
Bob
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|