List,
I have a short set of cylinder liners. (3)
They are newly bored from 86mm to 87mm and honed. I just did about 20
something liners and have this odd lot.
If you have a damaged, scored, or worn liner you want to replace.......
Contact me....
N197tr4@cs.com
Or if you want to bore a set of liners to your spec, I'll tell you where to
send them. <NFI> Slow time for Performance Engine Shop....quick turn
around from them. </HTML>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|