triumphs
[Top] [All Lists]

Re: [TR] Rear springs

To: triumphs@autox.team.net
Subject: Re: [TR] Rear springs
From: CarlSereda@aol.com
Date: Mon, 3 Dec 2007 15:38:56 EST
Jim,
Factory specifications were 6" clearance: bottom of frame to ground - front
and rear with original tires. I would measure behind front tire and in front of
rear tire and shoot for an even 6" clearance and frame parallel to ground.
Regards,
Carl
'63 TR4 since '74
------------------------------------
I have had my rear leaf springs reconditioned which has left me with a solid
axle TR4 that looks too high in the back end. Other members of my club have
made comments about it being too high. I need to have the springs redone so
that the rear of the car sits at the correct level. I can't seem to find any
references to the ride height of a TR4, ie how far from the center of the top
of the windscreen to the ground.
Can anyone help please?

Jim and his black 1962 TR4.
**************************************
Check out
AOL's list of 2007's hottest products.

(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [TR] Rear springs, Jim and Andreas Vassiliadis
    • Re: [TR] Rear springs, CarlSereda <=