> On a TR3A... is it possible to remove the clutch master cylinder with that>
box/bracket in place?> > Looks like maybe if the pushrod is pushed fully
home.> > Also -- any special (i.e. easy) way to get at the lower mounting bolt
on the> M/C? Thanks!> > Geo
There's an access panel inside the cockpit. Remove it and you can get to the
master cylinders from the aft side.
John
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|