underside rear of TR4 hoods have no welded-in steel cup receptors for the
TR4A style 'pointed' conical rear rubber stabilizers at rear corners. TR4 style
is just flat rubber pad against flat sheet metal at rear corners. But it seems
easy enough to swap in the conical rubber pedestals if fitting a TR4A hood to
a TR4.
I think all the TR4, TR4A, TR5, TR250 long-bubble hoods are the same
**************************************
See what's new at http://www.aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|