Hi,
I am removing the rear springs from my '60 TR3a.
I have removed everything removed except the front pin
which goes through the "silent block".
I installed the 5/16" x 24 bolt into the head of the pin.
According to Haynes I should be able to pry the pin out.
It seems to be frozen solid. Any Ideas?
Pete Bieling
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|