--===============0645614347==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Someone here in Utah, member of the BMCU has made such a tool. I don't
remember who but maybe he will join the discussion and provide a picture or
diagram.
Bill B
'58 TR-3A TS/30766 L
"I love it, she hates it... the car, of course!"
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of Geo &
Kathleen Hahn
Sent: Thursday, November 01, 2007 5:37 PM
To: Randall; Triumphs@autox.team.net
Subject: Re: [TR] Wheel Shimmy
This would seem to be something that a skilled machinist could readily make.
I have a drawing of the idea (came with my wire wheels) and, of course, a
wheel. Someone in our club has a significant other who is a gunsmith &
machinist and has asked if anyone needed lathe work.
I suppose the one other thing would be to know the diameter of the shaft the
cone mounts on on the balancing machine.
This would seem to be a good club project with the club holding onto the
tool and lending it out to be taken to the tire shop for their use &
returned. I have spoken to a local tire shop and they (say they) are
willing to use this to balance wires (probably because of the tires they
will sell if they will do this).
I drive a bit too much and buy tires a bit to often to be shipping them off
somewhere everytime I get a new set.
Am I missing something here or is this a reasonable approach?
Geo
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
> The proper cones are very rare, especially outside of places that
> specialize in wire wheels (like Hendrix and Valley Wire Wheel in Van
> Nuys, CA) but they do exist.
_______________________________________________
wbeech@flash.net
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
No virus found in this incoming message.
Version: 7.5.503 / Virus Database: 269.15.17/1103 - Release Date: 11/1/2007
6:01 AM
Version: 7.5.503 / Virus Database: 269.15.17/1103 - Release Date: 11/1/2007
6:01 AM
--===============0645614347==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
--===============0645614347==--
|