Paul
as your welder has given up on you, I have a use for your left over
steel-mix inert gas.
after each time you have used your can of POR put the lid on close and stick
the nozzle of your welder in the can. make sure the welder is in the off
position. then dispense a small amount of the gas into the can. enough to
displace the air. your POR will not skin over for the next time you use it. at
least mine don't.
Frank Fisher
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|