Nick,
Ps; SInce my springs are off the car it's easy to measure the curve (although
these springs have years of use TR folks always thought this car had a
perfect stance). Laying a straight bar across length of spring to rest ON TOP o
f
both 'end eyes' then measuring below that bar to topside of deepest curve area,
I
get 8 inches.
Also Factory Manual states when car is laden (150 lbs in both seats) ground
clearance should be 6 inches.
Carl
**************************************
See what's new at
http://www.aol.com
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|