TeriAnn Wakeman wrote:
>
>
> amcewen2@cogeco.ca wrote:
> my 3A is running considerably hotter then before.
>
> Do you have an original grille or an aftermarket one?
>
> Most aftermarket ones have 25% less area between the slats for air flow.
Aftermarket, where as before I had an original..
>
> Have you checked your timing? retarded timing or a sticky advance
> that doesn't always return will cause overheating as described.
I've been dicking with the timing in order to get it to start on cool
days in the spring/fall so that might be a contributing factor.
BTW with the 3/8 from the pully hole timing method where should the
vacuum advance wheel be at the start of the process?
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|