--===============1449405573==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
I have never used this guy but it looks like he has all the replacements
parts for Lucas Dizzys, including the weights & springs.
http://www.distributordoctor.com/distributor_advance_weights.htm
Bill B
'58 TR-3A TS/30766 L (rolling restoration)
"A bad day in your TR just gives you license to go shopping on-line again!"
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of
PBieling
Sent: Saturday, September 29, 2007 3:45 PM
To: triumphs@autox.team.net
Subject: [TR] Distributer
My 59 TR3A is having timing problems.
The weights for the advance in my distributor are worn out.
The holes that they pivot on are elongated.
This give me an irregular centrifugal advance.
Moss says the weights are NA. Where do I get them?
Peter Bieling
_______________________________________________
wbeech@flash.net
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
No virus found in this incoming message.
Version: 7.5.488 / Virus Database: 269.13.33/1037 - Release Date: 9/29/2007
1:32 PM
Version: 7.5.488 / Virus Database: 269.13.33/1037 - Release Date: 9/29/2007
1:32 PM
--===============1449405573==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
--===============1449405573==--
|