Darrell,
I just went through this exact same intermittent problem. In my case it was the
starter solenoid. The large copper contacts inside the solenoid between the
large
lugs were slightly pitted causing a drop in amperage. I took apart the solenoid
and filed the copper bar contacts flat again and reassembled the solenoid.
Works
every time now! One has to unsolder the coil connections on the cover to get it
apart after taking the screws out.
Greg Perry
>I am thinking I have a dead short or flat spot in the starter. What say the
>List?
>Thank You Guys,
>Darrell
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|