----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'Steve Ball'" <banjonut@verizon.net>; <triumphs@autox.team.net>
Sent: Sunday, September 16, 2007 2:46 AM
Subject: Re: [TR] TR3A heater question
>> 1. Am I correct that I orient the bottom plate so that the
>> trap door hinges aim roughly toward the front and the rear of
>> the car, and the trap doors open to give heat to the driver
>> or the passenger? This seems likely.
>
> Indeed, and it's true as well <g>
>
>> 2. If #1 is true, there are two ways to install the bottom
>> plate to make the trap door hinges run fore and aft.....which
>> way is correct? Is the connection for the defroster hoses
>> supposed to be near the glove box,
>
> Goes on the RH side of the car, which would be near the glove box if you
> have a LHD car.
>
> Randall
> _______________________________________________
> frede.thomas2@verizon.net
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|