Could you not rig a hard tube to a powerful vacuum cleaner and push
that through to the bearing in question and suck the filings out?
Assuming you are pulling the camshaft that is.
On Sep 13, 2007, at 8:15 PM, triumphs-request@autox.team.net wrote:
> From: "Andrew Uprichard" <auprichard@comcast.net>
> Date: September 13, 2007 6:59:01 PM MDT (CA)
> To: <DLylis@aol.com>, <vinttr4@geneseo.net>,
> <foxtrapper@aceweb.com>, <308gtsi@adelphia.net>,
> <triumphs@autox.team.net>
> Subject: Re: [TR] Noisy Engine
>
>
> It's a good point, but when you push the camshaft back in place,
> the filings
> should be contained.
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|