Use a nice wide flat screwdriver under your thumb to protect it and use the
feel in your thumb to press the spikes nicely into the carptet.
Bud
71TR6 CC57365 (Good 6)
66TR4A CTC57806 (The Wreck-Almost Parts)
66TR4A CTC57529 (The Project)
71F-250 Camper Special (Triumph Support Vehicle)
Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
----- Original Message -----
From: tom white
To: triumphs@autox.team.net
Sent: Friday, September 07, 2007 11:08 AM
Subject: [TR] Carpet snaps?
Hi List,
I have developed enough confidence in the drive line of my machine that I am
installing the carpets that have been sitting here for eight years.
The snaps that hold down some sections of the carpet have a spike ring that
goes through the carpet into the top half of the snap.
Can someone tell me the best way to bend these spikes over to secure the top
half of the snap?
Best regards,
Tom
_________________________________________________________________
Test your celebrity IQ. Play Red Carpet Reveal and earn great prizes!
http://club.live.com/red_carpet_reveal.aspx?icid=redcarpet_hotmailtextlink2
_______________________________________________
levilevi@comcast.net
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|