There is another approach that can be used to make a "red Line" tire.
Several years ago, a tire shop in California (I think their name had
'wire wheel' in it) would mill a groove in the sidewall of any tire.
I had them do this and then I painted the stripe in. The stripes have
lasted five years, 20,000 miles. I had to mask off that stripe area
to get it right. I asked my local body shop for the right chemicals.
They have a special cleaner for the rubber, and I think they used the
paint that is normally used on flexible front end parts. That way,
you can do this with any size and shape tire you want.
At 06:59 PM 9/4/2007, Randall wrote:
> > right now demand for this tire is very low".
>
>Part of the reason may be that other sources now offer sidewall stripes in
>your choice of color (including red) on any tire. IOW, you can have "red
>lines" on a more modern, higher performance tire than those antique
>Michelins.
>
>And if you chose to get them on a new Michelin tire, it's going to take a
>very determined judge to notice that they aren't the right model Michelin.
>
>Randall
>_______________________________________________
>vinttr4@geneseo.net
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>Triumphs mailing list
>Triumphs@autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
uncle jack
------------------------------------------------
No Virus Found In This Message
Scanned at barracuda.geneseo.net
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|