triumphs
[Top] [All Lists]

Re: [TR] TR3A bonnet safety latch?

To: "wbeech" <wbeech@flash.net>
Subject: Re: [TR] TR3A bonnet safety latch?
From: William Brewer <bbrewer@tvwireless.net>
Date: Mon, 27 Aug 2007 16:01:09 -0700
      Yep. The 802-276 safety hook is it.
      In the catalog you can see what it is pointing to. Mine  
required minor fitting with a file. I also made some spiffy stainless  
washers on the side of the mounting pin so the cotter key wouldn't  
gouge it up.

      Bill Brewer
      Tehachapi, CA

On Aug 27, 2007, at 7:39 AM, wbeech wrote:

> Bill,
>
> Mine is broken too, but I didn't see just the latch in the  
> catalog.  Is it
> what they are calling the 'Safety Hook' part number 802-276?  There  
> is no
> picture reference to it.
>
> Bill B
> '58 TR-3A TS/30766 L (rolling restoration)
> "A bad day in your TR just gives you license to go shopping on-line  
> again!"
>
>
> This information is privileged and confidential and is intended  
> only for the
> person or entity to which it is addressed. Any review, retransmission,
> dissemination or other use of this information (including  
> attachments) by
> persons or entities other than the intended recipient is  
> prohibited. If you
> are not the intended recipient, please delete the information from  
> your
> system and contact the sender.
>
>
> -----Original Message-----
> From: triumphs-bounces+wbeech=flash.net@autox.team.net
> [mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of
> William Brewer
> Sent: Sunday, August 26, 2007 9:48 PM
> To: triumphs@autox.team.net
> Subject: [TR] TR3A bonnet safety latch?
>
> Hi Tom,
>       My latch broke and I bought a new pot metal one from MOSS and  
> fitted
> it in. There was some minor interference that I fixed with a file,  
> but it
> works better than new now.
>
>       -Bill Brewer
>       Tehachapi, CA
>
> Message: 1
> Date: Sun, 26 Aug 2007 14:00:10 +0000
> From: "tom white" <tswhitez123@hotmail.com>
> Subject: [TR] TR3A bonnet safety latch?
> To: triumphs@autox.team.net
> Message-ID: <BAY110-F213BE9D87E1B0E2936F6F7E5D10@phx.gbl>
> Content-Type: text/plain; format=flowed
>
> Hi List,
>
> The lever handle on my bonnet safety latch gave up the ghost due to  
> metal
> fatigue.  Does anyone out there have a TR3A bonnet safety latch  
> they will
> part with?
>
> Thanks.
>
>
> Best regards,
> Tom
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>