1. Is there ever a problem created by dissassembling the oil pressure line on
a TR3?
2. Will dripping a drop of hot solder onto a hot bullet connector make it into
a good connector? Or will solder not really stick to these 'galvinized'
pieces.
3. Where can I tie-into the console for 'non-switched device' such as an
electric fan?
Thanks, Paul Dorsey
60 TR3
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|