--===============2069690311==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Conventional wisdom says "no", but give it a try and see how they feel.
Bill B
'58 TR-3A TS/30766 L (rolling restoration)
"A bad day in your TR just gives you license to go shopping on-line again!"
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of
Ronnie Babbitt
Sent: Friday, August 17, 2007 3:49 PM
To: Triumphs
Subject: [TR] Brake switch removal
Is it possible to remove and replace the hydraulic brake switch located at
the five way connector on a TR3 with out having to bleed the brake system? I
was told that if you do not press the brake pedal and quickly swap them it
can be done with out having to bleed the system.
Ronnie Babbitt
_______________________________________________
wbeech@flash.net
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
No virus found in this incoming message.
Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007
1:46 PM
Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007
1:46 PM
--===============2069690311==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
--===============2069690311==--
|