triumphs
[Top] [All Lists]

Re: [TR] trailing arm shims

To: triumphs@autox.team.net
Subject: Re: [TR] trailing arm shims
From: Dave1massey@cs.com
Date: Tue, 14 Aug 2007 13:18:17 EDT
In a message dated 8/14/2007 10:26:43 AM Central Daylight Time, 
jrmcarthur@verizon.net writes: 
> Now, I am concerned that I may have unintentionally 
> increased their thickness, and will mess up the settings if I install the 
> same number of shims that I removed.

Forget about it.  If you are rebuilding the suspension you "should" get a 
four wheel alignment afterwards anyway and they will add/remove shims to suit.

Dave   
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>