In a message dated 8/2/07 12:22:16 AM Eastern Daylight Time,
dkspence@telus.net writes:
<< I WOULD NOT GO THIS ROUTE (oops) as the adaptors and the wheel design pl
ace a lot of extra strain on the spindles and wheel bearings >>
It depends, if the replacement wheels have a deeper backspace, the effective
wheel offset will likely be the same as stock. Many front drive cars have a
deep backspace.
Harold
**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|