-------------- Original message --------------
From: Alain <triumphworks@gmail.com>
Thanks Irv, I was thinking of swapping pads for both cars. I can't recall if
they are the same calipers. ISTR that they are, given the my TR4A is late and
my TR6 is early.
>Those should both be 16P calipers if my notes are correct. Later TR6's use a
>16PB, and >that one takes a different pad.
Ted Schumacher also suggested his pads may do the trick nicely, too.
>Ted's carbon kevlar pads worked great on my TR4 vintage race car. They stopped
>the car >even when the pads were cold. They are so good that I'm going to put
>a set on my street >TR6. And they were very easy on the rotors as well.
>NFI.
>Irv Korey
>74 TR6 CF22767U
>Highland Park, IL
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|