triumphs
[Top] [All Lists]

Re: [TR] Dayton Wire Wheels verse Dunlop

To: Btmfdchn@aol.com, bbrewer@tvwireless.net, triumphs@autox.team.net
Subject: Re: [TR] Dayton Wire Wheels verse Dunlop
From: DLylis@aol.com
Date: Mon, 30 Jul 2007 10:56:57 EDT
Bill, I have been away so I may be a little behind the curve on this topic,  
but, if you matched your new wires to old splines that may explain some of the 
 noise you are getting.  I have reseached this issue about tubeless and  
those who I consider to be in the know say that the tubeles wires WILL  leak.  
(not may)  There is no way to keep the spokes from flexing  and eventually, as 
I 
am told, the seals will leak.  As to the quality of  the wheel, I have used 
the Dunlops if I had it to do all over again I would have  gone for the 
Daytons. 
 There is no comparison in quality and if this is a  car that you actually 
want to drive with less maintenance and less vibration,  get the Daytons.
 
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>