I recall no alignment problem there when I R&Red the grille & lights for
cleaning. Is your issue with the 'parking lights' (the little ones up in
the corner) or the turn signal flashers (the bigger one lower down)? Is it
possible that the bracket location changed when they went with the larger
(plastic) turn signal lights in mid-64?
Geo
----- Original Message -----
From: <CarlSereda@aol.com>
To: <triumphs@autox.team.net>
Sent: Sunday, July 29, 2007 3:33 PM
Subject: [TR] odd tr4 restoring prob
> ...the parking lamp support brackets were welded in the wrong location
> from factory on both valances.. I'd like to have these brackets function
> (stabilizing the 2 parklamps and grill corners)...
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|