triumphs
[Top] [All Lists]

Re: [TR] Alloy Water Pump

To: "'Triumph Sports car discussion'" <triumphs@autox.team.net>
Subject: Re: [TR] Alloy Water Pump
From: "Gene Glenn" <geneglenn@phoenixazcommercialproperty.com>
Date: Wed, 25 Jul 2007 14:42:58 -0700
Randall,

I have a cast 6 vane pump impeller, and I have no trouble in Phoenix.  I
also have, as a Gift from Darryl Uprichard of Racetorations, a new milled
pump impeller.  The cast al. is great, and the machined one will probably be
wonderful.

Gene

-----Original Message-----
From: triumphs-bounces+geneglenn=qwest.net@autox.team.net
[mailto:triumphs-bounces+geneglenn=qwest.net@autox.team.net] On Behalf Of
Randall
Sent: Tuesday, July 24, 2007 1:52 PM
To: 'Triumph Sports car discussion'
Subject: Re: [TR] Alloy Water Pump

> My conclusion from that conversation was that adding vanes does not
> necessarily improve water pump performance. Does anyone know
> if there is  credible
> evidence that it improves cooling in this case?

Improving cooling is a different matter than improving water flow.  The
evidence of increased water flow seems clear to me, several racers have
reported increased pressure readings inside the engine.  Henry Frye reported
pegging a 35 psi gauge coming off the straight (but declined to mention his
tach reading at the moment).

Whether and how much that improves cooling is a different matter.  However,
on the TRactor motor, there does appear to be a problem with insufficient
water movement around the #4 cylinder, which increased flow is bound to
help, IMO.  I've heard from several people who are also experimenting with
restrictors fitted to the front water passages, for the same reason.  (For
example, Mordy Dunst sells head gaskets with smaller holes for the front
water passages.)  All this is under racing conditions though, so may or may
not be applicable to the street.  Higher pressure inside the head will also,
at least in theory, reduce nucleate boiling near the limit, which can be
important for engines modified to produce twice (or more) as much power as
original.

It's not even clear to me that the real difference is 6 vanes vs 4 vanes.
The 6 vane pumps have more surface area on the vanes, and are finished all
over, while at least some 4 vane impellers have rough sand-cast surfaces.
The vanes are also curved on the 6-vane, straight on the 4-vane.  Might be
that a 4 vane pump built to the same vane shape and size as the 6 would work
just as well.  But until someone builds a pump like that, it's kind of a
moot point.

Randall
(Tedious but unavoidable disclaimer follows)






CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity
to whom they are addressed, shall be maintained in confidence and not
disclosed to third parties without the written consent of the sender. If you
are not the intended recipient or the person responsible for delivering the
electronic mail to the intended recipient, be advised that you have received
this electronic mail in error and that any use, dissemination, forwarding,
printing, or copying of this electronic mail is strictly prohibited. If you
have received this electronic mail in error, please immediately notify the
sender by return mail.
_______________________________________________
geneglenn@qwest.net

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>