You could try using a lawn mower blade balancer, which can be obtained at
hardware stores. It is a hollow, stepped, conical shaped piece which has a
stand consisting of a base and a spike sticking up which rests in the center
of the cone.
Joe
58 TR3A, TS40336LO
[demime 1.01d removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|