Best results may be obtained with the following procedure:
1. Remove carbs from the car.
2. Disassemble and clean carbs thoroughly in carb cleaner.
3. Compare the components of the carbs to insure that each carb is using
identical parts.
4. Reassemble the carbs with new gaskets and components wherever necessary.
5. Carefully place the carbs on the weight scales of a triple balance beam
scale.
6. Adjust any weight difference by grinding metal away from the body of the
heavier carb.
7. Replace carbs on the car and connect all linkages and lines.
8. Add oil to the dashpot.
9. Set mixture screw at 10 "Flats" from closed.
10. Start car and idle at 780 RPMs.
11. Enrich mixture screw until the engine begins to run faster.
12. Lean mixture screw until the engine begins to miss.
13. Enrich mixture screw one to two flats from the point where the engine
began missing.
14. If the above procedure does not produce the desired results consult a
LBC mechanic.
Best regards,
Tom
_________________________________________________________________
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_pcmag_0507
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|