> Can anyone remember if there is or ever was such a switch
> fitted to a TR4A.
I believe it was fitted to some cars, possibly even required in certain
markets (Belgium ?).
> If so could it be retro fitted?
Sounds like someone has replaced your gearbox (or at least the top cover) in
the past. As mentioned, you will need to either tap your top cover for the
switch, or find one already tapped.
If memory serves, the reverse light switch on a TR4A would be in the top of
the cover, over the reverse shift rail. Should be a boss there where the
switch goes. The tap required is an odd metric thread though, not in the
usual sets, so you'll also need to buy a tap for it.
Later cars had the reverse light switch on the side of the top cover, but I
think they may have had a modified reverse shift rail as well (with a hole
for the switch plunger to drop into).
FWIW, a TR250-6 top cover should work, if you can find one with the A-type
switches on it.
Randall
(Tedious but unavoidable disclaimer follows)
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|