Bill, we have urethane steering column bushings for the TR7. Ted
William L. Smith wrote:
>The grommet/bushing where the steering column passes through the firewall on
>my TR-7 has disintegrated and needs replacement. Several questions:
>
>
>
>1. Is this grommet made of a hard material similar to the nylon
>bushings used on the TR-6 gas pedal shaft (I think the TR-6 bushings are
>made of hard nylon), or is it made of a softer material?
>2. Does anyone have suggestions of an easy way how this bushing can be
>replaced without removing the entire steering column?
>3. BTW, one of the gas pedal shaft bushings on my TR-6 has also failed
>again. I seem to recall hearing a number of years ago about a softer
>bushing that is easier to install. Does anyone have any information on it?
>
>
>
>Thanks,
>
>Bill Smith
>
>'72 TR-6/'80TR-7
>_______________________________________________
>tedtsimx@bright.net
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>Triumphs mailing list
>Triumphs@autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>
>
>
--
Ted Schumacher
tedtsimx@bright.net
http://www.tsimportedautomotive.com
108 S. Jefferson St.
Pandora, Ohio, USA 45877
Fax: 419.384.3272 (24 Hrs.)
Phone: 800.543.6648 (US & Canada)
Tech/ Gen. Information/ Worldwide: 419.384.3022
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|