Scott Suhring wrote:
> Does anyone know of the part number for the clip on caged nuts that the TR3
> headlamps screw into to hold the assembly to the nose, and who might still
> sell them? TIA
Are you talking about Moss # 326-555? That p/n is shown for the TR250/6,
but also used on the TR4. Don't know about the TR3. It's the hickey
which presses into the front valence and a screw threads thru the
headlamp assy into it. The -4, -250 and -6 each use 3 per side.
hth
jim
--
J.C. Hassall
Blacksburg VA
64 TR4 in autox preparation
95% finished, 90% to go
_______________________________________________
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|