triumphs
[Top] [All Lists]

[TR] Carb linkage parts needed

To: banjonut@verizon.net, triumphs@autox.team.net
Subject: [TR] Carb linkage parts needed
From: William Brewer <bbrewer@tvwireless.net>
Date: Mon, 21 May 2007 20:05:59 -0700
      You would be better off just finding the right carbs off of Ebay.
      Have your Tried British Sports Cars of San Luis Obispo on Marsh  
Street? They are in your neck of the woods and I have bought lots of  
stuff there.

      Bill Brewer
      Tehachapi, CA
      TS72747LO



Date: Mon, 21 May 2007 18:46:55 -0700
From: "STEVE BALL" <banjonut@verizon.net>
Subject: [TR] Carb linkage parts needed

Hello list,

Here I am again, looking for parts.  I'm in the process of rebuilding  
my '60
TR3A, and since I basically don't have the right carburetors (a long  
story)
I'm going to do some slight modification.  I plan to use the curved TR4
manifold, along with the later model HS6 SU carbs.  However, I have  
run into a
bit of a snag...I got an email from Robert Goldman at Moss today  
saying the
throttle operation on the HS6 is backwards from the H6, so I will  
need to
basically use the TR4 linkage arrangement which is shown at the  
bottom of Pg
28 in the latest Moss catalog.  Unfortunately they (Moss) don't sell the
mounting bracket (illus. 75), so now I'm in the market for any (or  
all) of
this linkage hardware, including that bracket.  Does anybody have any  
idea
where to find it?

Please respond off list because I get the digest.
email:  banjonut@verizon.net

Thanks again ....in advance,

Steve Ball
Lompoc Ca
TS68164L


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>