> 6. Both pistons will pop, striking the piece of wood (remember the
> piece of wood?) on each side.
Except that sometimes, only one piston will pop out. If that happens, clean
and lube (with brake fluid) the piston that came out, and reinsert it. Now
clamp the piece of wood against it, so the other one will pop out next time.
Then you should be able to remove the first piston by prying gently against
the lip.
Randall
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|