Sending a second time.
----- Original Message -----
From: "Jerry Van Vlack" <jerryvv@adelphia.net>
To: "Bill & AnnaBelle" <anabil007@comcast.net>; "William Beecher"
<wbeech@flash.net>; <triumphs@autox.team.net>; "'BMCU'"
<bmcu@autox.team.net>
Sent: Wednesday, May 16, 2007 6:32 PM
Subject: Re: [TR] RE: [Bmcu] TR3 Oil
> The plugged hole half way up the side of the finned oil pan is for an oil
> temperature gauge if you want to install one. I have one on my TR4A. If
you
> plan on using the pan you should have the windage tray that comes with it
as
> well. Anyone who wants more information can write to me.
> JVV
>
> ----- Original Message -----
> From: "Bill & AnnaBelle" <anabil007@comcast.net>
> To: "William Beecher" <wbeech@flash.net>; <triumphs@autox.team.net>;
> "'BMCU'" <bmcu@autox.team.net>
> Sent: Wednesday, May 16, 2007 5:40 PM
> Subject: [TR] RE: [Bmcu] TR3 Oil
>
>
> > Willlam, the finned, alloy oil pan is an abomination ... :'( I will
> > suffer that agony and trade you (even up) for a pristine standard one
> > ... :-X
> >
> >
> >
> > >
> > >Also, it appears that I have some type of finned alloy oil pan that
> drains
> > >from the rear-center. It also has a plug in the side about mid-way up
> > >(possible oil-cooler inlet?). I would guess this is some sort of
> > >after-market rig but have no idea where it came from.
> > >
> > >
> >
> >
> > --
> > Bill Pugh
> > 1957 TR3 TS16765L
> > aka
> > Casper
> >
> > AnnaBelle Pugh
> > 1970 TR6 CC59179L
> > aka
> > Rosey
> > Wallace, CA
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|