triumphs
[Top] [All Lists]

RE: [TR] TR3a cockpit capping sequence

To: grandfatherjim@gmail.com, triumphs@autox.team.net
Subject: RE: [TR] TR3a cockpit capping sequence
From: "David Gunn" <ccgunn1010@hotmail.com>
Date: Fri, 11 May 2007 08:02:10 -0700
Please do not just respond directly to Jim.  I am also interested in the 
responses.

David Gunn
1954 TR2 TS3388L
Chico, CA


>From: "Jim Wallace" <grandfatherjim@gmail.com>
>Reply-To: "Jim Wallace" <grandfatherjim@gmail.com>
>To: triumphs@autox.team.net
>Subject: [TR] TR3a cockpit capping sequence
>Date: Fri, 11 May 2007 09:40:38 -0400
>
>Installing rear interior pieces - rear and side cappings, wheel arch vinyl,
>rear seat back, etc. and need some input regarding the sequence. I have
>looked on both web and in books, and am striking out - many pictures, for
>example in Piggott, have the nice convertible top cover in place, hiding
>exactly what I need to see.
>If someone could direct me to some pictures that would be ideal.
>What I need to know specifically are two things:
>1. Does the very rear capping that goes across the top of the seat back, go
>over or under the next two capping pieces, which go around the corner?
>2. Do the vertical fuzzy seals at the rear of the door opening simply get
>clamped between the hardboard piece and the body metal, and, how far down 
>do
>they go i.e. what happens where they interface with the carpet?
>Thanks,
>Jim Wallace
>TS81417LO
>
>

_________________________________________________________________
More photos, more messages, more storageget 2GB with Windows Live Hotmail. 
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_2G_0507


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>