List:
TR3A Engine & Tranny available right now. Components were rebuilt for a
Peerless project that now is going to have V-8 engine. Located in Wisconsin.
87mm
and is totally complete...see brief description.
Well below rebuild costs. NFI Joe A.
------------------------------------------------------------------------------
-------------------------------------
"The TR3 engine is fully assembled and even has the carbs attached to it.
The oil pressure is 80lbs cold when using a drill to turn over the engine
(plugs
removed of course). The engine was built using the big-bore kit.
The tranny is completely rebuilt as well.
Neither the engine nor tranny have any miles on them. The engine has been
started a couple of times since rebuild just to lubricate it better than
circulating the oil with the drill."
</HTML>
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|