Folks, I just bought a brand new $15 tall spray can of Weld-Thru Primer by
Evercoat, shook it for 10 min. (to disperse the zinc stuff) and only used it a
couple of times (spraying it upside down at the end to clear the nozzle each
time) and running a mig wire into it's nozzle to unclog it) and now it's
clogged up and I can't get it to spray! WHAT CAN I DO!!!!!!!!!!!!!!!
EVEN TAKING A SAWZALL TO THE CAN (BTDT) IS BEING RE-CONSIDERED.
WILL A $3 CAN OF RUSTOLEUM PRIMER NOT DO THE JOB?
tHANKS,
pAUL dORSEY
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|