A while back there was a thread on the materials used in the TR-3As. As
to the vinyls used in the interiors, covering the seats (backs and sides
of the leather seats and all of the vinyl seats), and the door tops.
However, the door, quarter, and gas tank cover panels were covered with
a sheet of vinyl that was not canvas backed, but had the same grain as
the other vinyl, and that was glued to the fiber board underlayment.
I have posted at the following website some pictures of the original
vinyls, as well as the replacement vinyl that was available a few years
ago, as a comparison.
http://www.aldermanroad.net/~jar/triumph_pictures/
Cheers.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|