Guys, thanks. I've ordered some of the Eastwoods clear, always had
excellent results with their products. I don't why I didn't look there
first. Thanks again
Dave Willner
Stroudsburg, PA
59 TR3A
70 MGB
70 BSA 441 Victor Special
> ----- Original Message -----
> From: <DLylis@aol.com>
> To: <ggelhar@earthlink.net>; <dwillner@ptd.net>; <triumphs@autox.team.net>
> Sent: Monday, December 18, 2006 10:01 PM
> Subject: Re: [TR] protecting polished parts
>
>
>> In a message dated 12/18/2006 9:43:42 P.M. Eastern Standard Time,
>> ggelhar@earthlink.net writes:
>>
>> http://www.eastwoodco.com/jump.jsp?itemID=619&itemType=PRODUCT
>>
>>
>>
>> The product from Eastwood is a heat resistant clear coat. You can get
>> it
>> from your auto supply store up to 500 degrees. I use it in the same way
>> as
>> they describe. Polished alloys, steel, iron, etc. It works great.
>>
>> David
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|