Sounds like the best of both worlds. Thanks for spearheading this
effort.
I'm still in - let us know the final cost and payment is on its way.
C
-----Original Message-----
From: owner-triumphs@Autox.Team.Net
[mailto:owner-triumphs@Autox.Team.Net] On Behalf Of Joe Curry
A description of what I am doing is as follows:
The image will be the same as the window decals I have done (Triumph
Globe
surrounded by the list name and address). See the bottom of this link
for a
jpg image: http://members.cox.net/spitlist/centercaps.html The gray
portions will be in chrome with the red, blue and black filled with a
raised
baked enamel high l\gloss finish.
On the back will be 2 threaded posts 1 inch long placed vertically 1
inch
apart. The bar mount attachment will be a flat plate of 1/8" mild steel
laser cut with a tab at the bottom in a standard 2 hole bar mount. It
can
be used as a backing behind the grill as well for a very solid mount.
The
plates will be painted black but some (this means you, Fred) will likely
opt
to powder coat it.
Best regards,
Joe Curry
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|