Chad,
I have 15X7 Zero offset Konigs on my TR6. They won't present a problem on
the back, BUT on the front you'll be lookin' at shaving a bit of material on
the upper a-arms, as well as trimming down the outer a-arm bolt or buying a
shorter bolt...and turning it around(that will require trial &
error)...lastly, i went with 1/4" spacers...they're pretty cheap. I got a
set for $12.00 bucks. Lastly, with the Konigs, I had to order a bolt that
was was tapered AND had a 1/4" shank on the end to get an adequate amount of
threads on the stud. To me it was easier to buy different lugs(about a buck
a piece) than to swap out the studs...just did that converting from wires.
I don't know what kind of set up they have on the Panasports so you may not
have to do that.
I have pics of the wheels installed on the car if you care to see.
Cheers,
Todd Bermudez
From: Chad Jester <triumph74tr6@yahoo.com>
Reply-To: Chad Jester <triumph74tr6@yahoo.com>
To: triumphs@autox.team.net
Subject: [TR] Panasport Wheel Question
Date: Mon, 4 Dec 2006 16:44:05 -0800 (PST)
List-
Will 15*7 "0" offset Panasports fit a TR6 without
rubbing?
TIA,
Chad
_________________________________________________________________
All-in-one security and maintenance for your PC. Get a free 90-day trial!
http://clk.atdmt.com/MSN/go/msnnkwlo0050000002msn/direct/01/?href=http://clk.atdmt.com/MSN/go/msnnkwlo0050000001msn/direct/01/?href=http://www.windowsonecare.com/?sc_cid=msn_hotmail
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|