At 08:09 PM 11/26/2006, DLylis@aol.com wrote:
>While replacing the grommets on my 6 I got half way through the job and
>realized what I was doing wrong. I was using the wrong
>expletives. I found that
>increasing the volume and the offensiveness of the expletives when the
>grommet falls through the hole to the inside prevented it from happening so
>frequently.
>Just a tip.
Can you share which ones work best?
I still have one grommet missing where my emergency bonet release enters
the engine compartment from the passenger foot well. I would love to have
one there, though... so if I knew the magick words, I could try the put the
grommet in again.
Thanks!
Aldwyn
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|