RE: [TR] Spit: brake caliper sticking

["Randall" <tr3driver@ca.rr.com>]

> Should I just try the same procedure again, or do I 
> need to replace the pistons?

My suggestion would be to remove the pistons and inspect them.  If you can
feel pits on the sealing surface, replace them.  Otherwise, it might just be
dry/sticking/dirty seals, and they will be fine when reassembled with new
seals and a smear of brake fluid.

Randall




===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org