Re: [TR] TR250 Rear Springs - recommendations

[Greg Perry <rgperry@earthlink.net>]

Chad,

Did you check the rear camber before replacing the uprated springs?
The rear camber can raise and lower the rear of the car if it is not
set correctly.  Ideally -1/2 inch camber setting with +/- 1/2 inch
margin.

Richard Good produces/sells the lowering 1" springs and spacers to adjust 
height.  

 http://www.goodparts.com/

Greg Perry


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org