It has been noted that several people don't have badge bars and would like
to mount a Triumph List Grill Badge to their baby.
With this in mind, it may be possible to include some of those in the
production run, and more quickly get us to the magic "tipping point" that
pushes this project forward.
So, I have to inquire of those who have grill badges and/or want one, what
is the standard mounting hardware on such things? I am assuming that there
are 2 threaded posts extending from the back with a drilled metal piece that
goes onto both posts and is secured with nuts. If this is correct, I need
to get a consensus on the location and size of these posts so that I can do
inquiries of the manufacturers I am dealing with.
Thanks,
Joe
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|