Howdy all.
It has literally been decades since I've played around with the ignition
system on an LBC (and have only done it once), but since my 250 left me
stranded two days ago with a bad rotor -- thankfully I had a spare -- I
thought it was time to spend some much needed time on it. I'm going to
do the easy stuff (plugs, wires), but also want to change the points,
condenser, check timing, etc. Can anyone recommend a guide that assumes
a level of competence of a five year old? Thanks so much!
Bill S.
1968 Triumph TR-250 (CD8464L)
1965 Austin Healey 3000 Mk III
www.TR-250.com <http://www.tr-250.com/>
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you have
received this communication in error, please do not print, copy, retransmit,
disseminate, or otherwise use the information. Also, please indicate to the
sender that you have received this communication in error, and delete the copy
you received.
IRS CIRCULAR 230 Disclosure: Under U.S. Treasury regulations, we are required
to inform you that any tax advice contained in this e-mail or any attachment
hereto is not intended to be used, and cannot be used, to avoid penalties
imposed under the Internal Revenue Code.
Thank you.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|