I glued the foil heatshield to the underside of the carpet. It does interfere
somewhat whith the carpet lying flat, but it does seem to help prevent my knee
from getting buned. I didn't want to put it on the underside of the tunnel
because I figured the foil woult get torn and the foam would soak up a lot of
oil and dirt.
Bob
-------------- Original message ----------------------
From: "Chris Bohn" <cbohn@sidepipe.com>
> Ed,
>
> I glued foil heatshield to the underside of the gearbox cover on my 4A, foil
> side out. Works well at reflecting the heat back and gives sound insulation
> as well.
>
> Chris
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|