Hi,
Switch to the yellow bottles which hold MAPP gas. It will heat to a higher
temperature. Available at Home Depot, Wal-Mart, probably most auto parts
stores, etc. I just bought two and I think they were about 7 or 8 dollars each.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
Topsham, Maine
-----Original Message-----
From: amcewen2@cogeco.ca
To: triumphs@autox.team.net
Sent: Wed, 26 Jul 2006 6:16 PM
Subject: Re: [TR] TR3A: Let sleeping bushings lie?
>>To get them off easily, start by cutting a lengthwise slot with a Dremel
>>and
>>abrasive cutoff blade. Be sure to wear eye protection and buy a supply of
>>blades, they break easily.
>> >>
>
>I like the Dremel cut-off wheels that have a fabric-like construction. They
>>won't shatter if you put a side load on them, like the others do.
>
I think it's fibreglass that's used in those, yes they're well worth the
price.
I've had good luck with the dremel method in the past so that's what I'll do
this time as well. You just can't get enough heat out of those little blue
propane bottles.
Thanks all
________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and IM.
All on demand. Always Free.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|