Terry,
That should be Joe Alexander. You can email him at N197TR4@cs.com
Bob Danielson
1975 TR6
http://tr6.danielsonfamily.org
-----Original Message-----
From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net]
On Behalf Of Terry Smith
Sent: Sunday, June 18, 2006 5:43 PM
To: triumphs@autox.team.net
Subject: [TR] Carburator Heat Shield
Some time back--maybe a year?--someone on the list made these beautiful
carburator heatshields to protect the fuel from the heat of the exhaust in
the tractor engines. I bought one then, but on looking at the fit today for
the first time, I see it fouls against the throttle linkage.
I've looked in archives, but can't find it, though I'm pretty sure it's
there someplace. Is the fix to cut a portion off the shield?
Terry Smith, '59 TR3A
New Hampshire (I may actually start this car with a week or two, after 3
years
3 months!)
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date: 6/16/2006
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|